The basic idea is to have networked performances taking place simultaneously in various cities taking part in Multiplace. Since PD's capabilities in transmitting or receiving video-streams are limited/none, we use a workaround: a uniform performance patch is created and distributed with video and audio sources across the participating places. The patch is done so, that everything can be connected through the network using netsend and netreceive. The various places take turns in controlling the patch, the control is spread through the network, and in every place the result is the same.
As a central node helping in passing the various proxies, nats, gateways and firewalls in between the places, the server smecnet (itchybit.org) will be used. Each city sends out data to the port 30030 and receives data on the port assigned to the city.
Banska Bystrica: 30033 Brno: 30031 Praha: 30032 Bratislava: 30036 Kosice: ? Vyhrazene pro patch: 30030 Smecnet's IP: 92.240.234.40 (use IP, to prevent problems with DNS)
Every controllable element of the patch (numbers, messages, toggles, bangs, sliders) has to be connected to a netsend and to a netreceive.
Connection to a netsend: - Needs to send out data to the port 30030 - There is ONLY ONE netsend for each place - To send various controlls across a single channel, use pack or prepend - When in send mode, DONT RECEIVE CONTROLS to prevent loops
Connection from a netreceive: - Each place receives data from the port assigned to the city - Use route to distinguish between various controls comming-in from a single channel - When in receive mode, DONT SEND OUT CONTROLS to prevent loops
We use SSH Tunneling to pass through proxies, etc. ATM we use it only to receive data, but later-on everything will flow through the tunnels.
1. Connect the netsend
Piece-of-cake level: Connect to the IP 92.240.234.40 and to the port 30030
[connect 92.240.234.40 30030( | [netsend]
2. Open the SSH-Tunnel
Gay-metal level: Depends if you are using Linux or Windows.
3. Connect to the SSH-Tunnel
Im-so-geek level: The tunnel brought the ports from smecnet to our localhost (the machine you are using). So just:
[netreceive 30036] - this is the port of the city you are receiving.
This you have to do for each place taking part. Now everything should work.